- Overview
- Product Description
- Technology
- A grade material
- Our factory
- QC system
- Packaging & Shipping
- Project Cases
Basic Info.
Model NO.
SSM66M-700W
Number of Cells
132
Application
Home/Commercial/Industrial
Condition
New
Certification
ISO, CE, TUV
Material
Monocrystalline Silicon
Weight
36kg
Coloer
Silver or Black
Cell Number
132
Cell Size
210mm
Busbar
12bb
ODM/OEM
Accepted
Panel Efficiency
22.7%
Wind/Snow Load
2400PA/5400PA
Max System Voltage
1500VDC
Transport Package
Pallet
Specification
2400*1303*35mm
Trademark
Sunshine
Origin
China
HS Code
8541402000
Production Capacity
5000pieces/Week
Packaging & Delivery
Package Size
145.00cm * 120.00cm * 245.00cm
Package Gross Weight
1200.000kg
Product Description
Home use 10BB/12BB cell mono solar module 650w 660w 670w 680w 690w 700w 800w 1000w solar energy panel cost 
ELECTRICAL CHARACTERISTICS AT STC
| Model | SSM-M12/132H 675W-700W | ||||
| Solar Cell | 210mm 132cells | ||||
| Rated Maximum Power(Pmax) [W] | 680 | 685 | 690 | 695 | 700 |
| Open Circuit Voltage(Voc) [V] | 42.4 | 42.6 | 42.8 | 43 | 43.2 |
| Maximum Power Voltage(Vmp) [V] | 38.6 | 38.8 | 39 | 39.2 | 39.4 |
| Short Circuit Current(Isc) [A] | 18.72 | 18.74 | 18.76 | 18.79 | 18.81 |
| Maximum Power Current(Imp) [A] | 17.62 | 17.66 | 17.7 | 17.74 | 17.78 |
| Module Efficiency [%] | 21.9 | 22.1 | 22.3 | 22.5 | 22.7 |
| Power Tolerance | 0~+5W | ||||
| Temperature Coefficient of Isc(α_Isc) | +0.04%/ºC | ||||
| Temperature Coefficient of Voc(β_Voc) | -0.25%/ºC | ||||
| Temperature Coefficient of Pmax(γ_Pmp) | -0.34%/ºC | ||||
| STC | Irradiance 1000W/m²,cell temperature 25ºC, AM1.5G | ||||
Half Cell module technology
By using half-cells, the electrical current ( i ) flowing in each busbar is halved.
Therefore, the amount of internal losses in a half-cut module is 1/4 of a full sized cell module.
Therefore, the amount of internal losses in a half-cut module is 1/4 of a full sized cell module.
Less Shading Loss
Shading loss of half-cell is much better than normal module in certain shading conditions.
Half-cell technology
Half Cell design ensures an improved shading response, resulting in higher yields when the module is partially shaded. Shading loss experienced by half-cell modules is much better than conventional modules in certain shading conditions.
Low Working Temperature
Half-cell module is around ~2 degrees lower
Half-cell module is around ~2 degrees lower
| Higher Transmittance EVA Higher GEL Content Good durability can resist high temperature, moisture, ultraviolet and so on. | PERC 10BB Mono Solar Cells More than 22% Efficiency 182mm x 182mm Size Anti-Pid |
| IP68 Water proof Junction Box Innovative full-glue-filled junction box Outstanding sealability | Sliver and Black Color Optional Aluminum Alloy 120N Tensile Strength Frame | 4mm2 Qualified cable with MC4 500N Tensile Strength |
166mm, 182mm, 210mm solar panel production line
9BB, 10BB 12BB solar cell size
9BB, 10BB 12BB solar cell size
Strict quality control procedures
Export more than 160 countries
OEM/ODM service accept
10 years total workmanship and materials warranty , 10 years for at least 90% and 25 years for 80% linear power output warranty 
10 years total workmanship and materials warranty , 10 years for at least 90% and 25 years for 80% linear power output warranty
100% Solar Cells Sorting
Color and performance selection
To ensure the production of high-quality cells, sort out unqualified products such as appearance defects, internal defects, and lack of process performance.
To ensure the production of high-quality cells, sort out unqualified products such as appearance defects, internal defects, and lack of process performance.
Middle Test
EVA and appearance inspection
Ensure PT / EVA size meets technical requirements
Ensure that the product is free of scratches, creases, debris, etc.
Overall inspection
PV Module appearance
Ensure that the product has no color difference and no burrs.
PV Module appearance
Ensure that the product has no color difference and no burrs.
Make its reach Grade A standard.
EL Testing
Solar panel power inspection
Ensure that there are no cracks or defects inside the module.
Ensure that the power meets customer standards.
